Supply PWM solar charge controller 12 V / 24 V automatic recognition

1.Solar charge controller solar street light 2.Pulse Width Modulated Control 3.over-discharging control...

Solar controller charging and discharging

 

 

Main features:

1, use discharge rate characteristics of fixed battery accurate discharge control. Discharge from the discharge end voltage is rate curve mend the control points, eliminate the pure voltage control discharge inacurate, accord with battery of inherent characteristics, that is, different discharge rate with different end voltage.

2, has used the single-chip microcomputer and special software, realize the intelligent control;

3, overcharge, discharge, electronic short circuit, overload protection, unique meter protector against fraud protection automatic control; All above protection without causing damage to any component, doesn't burn insurance;

4, adopted PWM charging series main circuit, make charging loop voltage loss of use of the diode is charging circuit reduce nearly half, charging efficiency is not high PWM 3% 6%, increased the power of time; Discharge the ascension of the recovery charge, normal fill continuously, float the automatic control system filling way by a longer service life; At the same time a high precision temperature compensation;

5, intuitive LED tube current battery state instructions, let users understand the use situation;

6, all control all adopt the industrial chip (only to take I industrial controller), can in cold, high temperature, moisture environment running freely. Use both crystals timing, timing control precision.

7, cancelled potentiometer adjustment control set point, and use the Flash memory recording the work of the control points, to set up the digital, eliminate the potential for a WenPiao, such as partial vibration control points appear to reduce error accuracy, reliability factors;

8, use the digital LED display and setting, a key type operation can complete all Settings, use very convenient, intuitive, and

9, with dc output or 1 HZ stroboscopic output 2 kinds of output choice, stroboscopic output is especially suitable for the LED traffic warning, etc.

 

 

Controller panel graph:

Overall size: 140 X 90.5 X 27.2 (mm)

Installing hole size: 133.5 X 70 (mm)

Technology index

Type ZWDC5 ZWDC10 ZWDC15 ZWDC20

Rated charge current 5 A 10 A 15 A 20 A

Rated load current 5 A 10 A 15 A 20 A

System voltage-12 V; -24 V / 12 V AUTO;

Overload, short circuit protection 1.25 times rated current 60 seconds. 1.5 times rated current 5 seconds overload protection movement. Quartile 3 times rated current short circuit protection movement

No-load loss than 6 mA

Charging loop pressure drop is not more than 0.26 V

Discharge circuit pressure drop is not more than 0.15 V

Super voltage protection 17 V, × 2/24 V;

Working temperature industry-specific:-35 °C to + 55 °C (suffix I);

Ascension recharging voltage 14.6 V; × 2/24 V;(keep time: 10 min) (only when appeared when discharge calls)

Straight ChongChongDian voltage 14.4 V; × 2/24 V;(keep time: 10 min)

Float filling 13.6 V; × 2/24 V;(maintenance time is: to return until charging voltage action)

Charging to return to voltage 13.2 v; × 2/24 V;

Temperature compensation-5 mv / °C / 2 V (ascension, fill continuously, floating filling, charging to return to voltage compensation);

Owe pressure voltage 12.0 V; × 2/24 V;

Discharge voltage 11.1 V-discharge rate of initial discharge compensation fixed voltage (no-load voltage); × 2/24 V;

 

   

Supply PWM solar charge controller 12 V / 24 V automatic recognition